Table of Contents
Advertisement
1.
Temporarily disconnect the terminal from its power source
by removing the power connector from the Power port on
the back panel. (Twist the connector to the right to unlock
it and then pull it straight out.)
2.
While pressing — and holding down — the paper feed
button, insert the power connector back into the power
port, twisting the connector to the left to lock it into
position. The printer test starts automatically, and then
stops after a few seconds.
3.
When you see the test printout, release the paper feed
button. The complete test printout, which shows printer
information and repeating character strings of various
sizes, is about 38 centimeters (15 inches) long.
4.
When you have completed the power-on printer test, press
the paper feed button to advance the paper roll a few
centimeters (inches) and then tear off the printout using
the serrated metal tear strip.
Congratulations! Your Omni 3210 terminal, and any optional
peripheral device(s) you may have connected to it, should now
be completely installed and ready to use.
Omni 3210 Installation Guide
29
Advertisement
Table of Contents
