Table of Contents
Advertisement
Omni 3210 Installation Guide
Connect a Smart Card Reader/Writer or PINpad 501
To connect a VeriFone SC 4XX or SC 5XX smart card reader/
writer, or a PINpad 501, to the Omni 3210 terminal (see
Figure 11):
1.
If a serial cable is not already connected to the smart card
reader/writer or PINpad 501, insert the RJ-11 type plug on
one end of the cable into the modular jack on the device.
2.
Insert the larger RJ-45 type plug on the other end of the
serial cable into the Bar Code/PIN Pad port on the back
panel of the Omni 3210 terminal.
Figure 11 SC 4XX, SC 5XX, and PINpad 501 Connection
Connect a Bar Code Wand
To connect an optional bar code wand, insert the RJ-45 type
plug on the free end of the device's serial cable into the Bar
Code/PIN Pad port on the back panel of the Omni 3210
terminal (see Figure 12).
20
Advertisement
Table of Contents
