VeriFone Omni 3210 Installation Manual page 15

Telset Port
Figure 9 Pass-Through Telephone Line Connection
Now that you know the advantages and disadvantages of direct
and pass-through telephone line connections, you can proceed
to install the type of connection you want.
Set Up a Direct Telephone Line Connection
To set up a direct telephone line connection for your Omni
3210 terminal, follow these steps (refer to Figure 8):
1. Insert the connector on one end of the
telephone line cord into the Telco port on the
back panel of the terminal. (The Telco port is
identified by the icon shown to the right.)
Omni 3210 Installation Guide
RJ-11 Type
Modular Wall Jack
Telco Port
Telephone
RJ-11 Type Jack
in Telephone Base
15