Download Print this page
Valor Firelite OXYSAFE 2 Owner's Manual

Valor Firelite OXYSAFE 2 Owner's Manual

Radiant/convector gas fires
Hide thumbs Also See for Firelite OXYSAFE 2:

Advertisement

600B691/08
OWNER'S GUIDE
F i r e l i t e
R e g e n c y
&
OXYSAFE 2
OXYSAFE 2
MODEL 3370
MODEL 3371
(GC No. 32-032-31)
C o n t o u r
OXYSAFE 2
MODEL 338
(GC No. 32-032-32)
RADIANT/CONVECTOR
GAS FIRES
THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20)
THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB) AND THE
REPUBLIC OF IRELAND (IE) ONLY.
This guide is intended to help you care for your Valor gas fire. Please read thoroughly
before using and keep for future reference
We trust that this guide gives sufficient details to enable your appliance to be operated
and maintained satisfactorily. However, if further information is required, our
Valor Technical Helpline will be pleased to help.
Please telephone 08706 061 065 (National call rates apply).
This guide to be left with the owner
© Valor Heating

Advertisement

loading

Summary of Contents for Valor Firelite OXYSAFE 2

  • Page 1 THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB) AND THE REPUBLIC OF IRELAND (IE) ONLY. This guide is intended to help you care for your Valor gas fire. Please read thoroughly before using and keep for future reference We trust that this guide gives sufficient details to enable your appliance to be operated and maintained satisfactorily.
  • Page 2 BS EN ISO 9001 quality system accepted by the British Standards Institute. The Highest Standards Valor is a member of the Society of British Gas Industries which works to ensure high standards of safety, quality and performance. Careful Installation Valor is a CORGI registered company.
  • Page 3: Table Of Contents

    C A R E Thank you for choosing Valor. All Valor gas fires are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years’ trouble-free service. Your owner guide aims to improve your understanding and appreciation of your Valor gas fire by providing simple and informative instructions to ensure that you benefit from the excellent performance and features it has to offer.
  • Page 4 OWNER’S GUIDE • Have the fire installed by a competent person. In the United Kingdom, installation must be in accordance with the latest edition of the Gas Safety (installation & use) Regulations. In the Republic of Ireland, installation must be in accordance with all national and local regulations in force.
  • Page 5 OWNER’S GUIDE • Wait three minutes before attempting to relight if the fire is switched off or the flames are extinguished for any reason. (Your fire is fitted with a safety device that will automatically shut off the gas supply to the fire if, for any reason, the flames go out.) •...
  • Page 6: Appliance Dimensions

    OWNER’S GUIDE APPLIANCE DIMENSIONS Figure 1. Dimensions & clearances Page 6...
  • Page 7: Operating Your Fire

    OWNER’S GUIDE OPERATING YOUR FIRE PLEASE NOTE When operating your fire for the first time, some vapours may be given off which may cause a slight odour and could possibly set off any smoke alarms in the immediate vicinity. These vapours are quite normal with new appliances. They are totally harmless and will disappear after a few hours use.
  • Page 8 OWNER’S GUIDE In the unlikely event of failure of the ignition mechanism the pilot can be lit with a long match or taper – See the next page. • When the pilot has lit keep the knob depressed for about ten seconds to allow the flame sensing probe to warm up.
  • Page 9: Cleaning

    The radiants can be cleaned with a soft brush - see below for how to remove the radiants. REPLACING THE RADIANTS See figure 4. Always use the correct type of replacement radiant. Ask for Valor part number 0544649 (GC No. 125 164). Turn the fire off • and allow it to cool before attempting to remove the radiants.
  • Page 10: Maintenance

    We recommend that all gas appliances and their flues, wherever situated, are checked annually. Servicing • In the United Kingdom servicing can be carried out either by a Valor Service engineer or a CORGI registered installer. • If you require your fire to be serviced, please contact Valor Service on 08706 090 081 and quote the following details;...