Fluid; General Notes; Operating The Viper; Selecting The Location - Look Solutions Viper 2.6 Operating Manual

4.1 General Notes

The Viper 2.6 has been designed to be used with Look fog fluids.
The following Look fog fluids are available:
Quick-Fog
Regular-Fog
Slow-Fog
If fluids have been used other than Look fog fluids we can't grant warranty on
parts that have been in contact with the fluid.
4.2 Changing the fluid can
– Disconnect the fluid tube from the lid by retracting the brass collar [12] and
removing the coupling [11].
– Remove the can from the tank housing of the Viper 2.6
– Unscrew the lid [13] of the empty can and screw it onto the new container.
– Place the full can into the tank housing.
– Push the brass coupling [11] into the brass collar [12] until you hear a click.The
brass collar is now locked firmly.

5.1 Selecting the location

The location in which the Viper 2.6 is to be operated must
– be dry,
– be free from dusty or polluted air,
– be free from vibrations,
– be an non-flammable place or surface,
– be well-ventilated with fog-free air keeping the ambient operating temperature
between 5° C and 45° C and the relative air humidity below 80%.

4. Fluid

thick, quick disappearing fog fluid
thick, long lasting fog fluid
thick, extremely long lasting fog fluid

5. Operating the Viper 2.6

8