Trigger Output; Dc Out - Yamaha RX-A730 Owner's Manual

Wallpaper
Selects the image to be used as wallpaper on the TV.
Settings
Picture 1 (default), Displays the selected image on the TV screen when there is no video
Picture 2, Picture 3 signal.
Displays a gray background on the TV screen when there is no video
Gray signal.
_ Trigger Output
Sets the TRIGGER OUT jack to function in sync with the power status of each zone or
input switching.
_1 Trigger Mode
Specifies the condition for the TRIGGER OUT jack to function.
Settings
The TRIGGER OUT jack functions in sync with the power status of the
Power (default) zone specified with "Target Zone."
The TRIGGER Ot JTjack fl Jnctions in sync with the inp_ Jtswitching in
Source the zone specified with "Target Zone."
An electronic signal is transmitted according to the setting made in
"Source."
Manual Select this to manually switch the output level for electronic signal
transmission with "Manual."
Source
Specifies the output level of the electronic signal transmitted with each input, switching
when "Trigger Mode" is set to "Source".
Choices
HDMI 1-5, AV 1-6, V-AUX, AUDIO 1-2, TUNER, (network sources), USB
Settings
Low Stops the electronic signal transmission when you switch to the input
source specified in this option.
Transmits the electronic signal when you switch to the input source
High (default) specified in this option.
Manual
Switches the output level for electronic signal transmission manually when "Trigger
Mode" is set to "Manual". This setting can also be used to confirm proper function of
the external device connected via the TRIGGER OUT jack.
Choices
Low Stops the electronic signal transmission.
High (default) Transmits the electronic signal.
[_ Target Zone
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Settings
Main
Zone2
All (default)
When "Trigger Mode" is set to "Power," electronic signal transmission
is synchronized with the power status of the main zone.
When "Trigger Mode" is setto "Source," electronic signal transmission
is synchronized with the input switching in the main zone.
When "Trigger Mode" is set to "Power," electronic signal transmission
is synchronized with the power status of Zone2.
When "Trigger Mode" is setto "Source," electronic signal transmission
is synchronized with the input switching in Zone2.
When "Trigger Mode" is set to "Power," electronic signal transmission
is synchronized with the power status of the main zone or Zone2.
When "Trigger Mode" is setto "Source," electronic signal transmission
is synchronized with the input switching in the main zone or Zone2.
_ DC OUT
Configures the DC OUT jack setting.
17 Power Mode
Selects how to supply power to the Yamaha AV accessory connected to the DC OUT
jack.
Settings
Supplies power through the DC OUT jack continuously regardless of
Continuous (default) the power state (on/standby) of the unit.
Supplies power through the DC OUT jack only when the main zone is
Main Zone Power turned on.
Sync.
(This setting may not work properly on some accessories.)
CONFIGURATIONS • Configuring various functions(Setup menu) I En 95