Yamaha RX-A730 Owner's Manual page 28

• The following operation is available only when your TV is connected to the unit via HDMI.
After connecting external devices (such as a TV and playback
devices) and power cable of the unit, turn on the unit.
Press AV 2 to select "AV 2" (video input jack to be used) as the input
source.
Use the cursor keys to select "Audio In" and press ENTER.
Use the cursor keys to select "AV5" (audio input jack to be used).
AV 2
4
oON SCREEN
Cursorkeys
ENTER
Press ON SCREEN.
Use the cursor keys to select "Input" and press ENTER.
Use the cursor keys (qf>) to select "AV2" (video input jack to be
used) and press the cursor key (A).
Press ON SCREEN.
This completes the necessary settings.
If you select "AV 2" as the input source by pressing AV 2, the video/audio played back
on the video device will be output from the unit.
PREPARATIONS • Connecting playback devices I En 28