Settings Screen - Yamaha RX-A730 Owner's Manual

@ Settings screen
@ Rename
Edits the network name (the unit's name on the network) or the name of each zone. Click "APPLY"
to apply the changes to the unit.
IP Address
Configures the network parameters (such as IP address). Click "APPLY" to apply tile changes to
the unit.
MAC Filter
Sets tile MAC address filter to limit access to the unit from tile network devices. Click "APPLY" to
apply the changes to the unit.
Auto Reload
Enables/disables automatic reloading. When "Auto Reload" is "On" (enabled), the web control
screen reloads the status of the unit every 5 seconds.
Network Standby
Enables/disables tile network standby function.
Backup/Recovery
Creates a backup of the unit's settings on tile PC or restores tile settings from the backup.
Firmware Update
Updates the firmware of tile unit by using the firmware you have downloaded on the PC.
Follow the on-screen instructions to start the firmware update.
Create Link
Creates a shortcut link to tile desired control screen.
Tips
Displays tips for use of tile web control.
@ BACK
Moves to tile top menu screen.
@ RELOAD
Reloads the current status of the unit.
• When using the MAC address filter, make sure you specify the MAC addresses of your network
devices correctly. Otherwise, the unit will be inaccessible from your network devices such as PCs and
other external devices.
• Do not operate the unit during the recovery process, as this may result in the incorrect recovery of the
settings. When the recovery finishes, click "OK" to set the unit to standby mode.
• The backup does not contain user information (such as user account and password) or unit-specific
information (such as MAC address and IP address).
• Windows, Intemet Explorer are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
• Safari is a trademark of Apple Inc.
YAMAHA CORPORATION
© 2013 Yamaha Corporation YF236A0/WCEN