Yamaha RX-A730 Owner's Manual page 84

IP Address Configures the network parameters (such as IP address). 92
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 92
Network
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 92
Network Name Edits the network name (the unit's name on the network) displayed on other network devices. 93
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the TV screen. 93
Max Volume Sets the Zone2 maximum volume to prevent excessive loudness in the second zone. 94
Multi Zone
Zone2 Set Initial Volume Sets the Zone2 initial volume for when tile unit is turned on. 94
Zone Rename Changes the zone name (for Zone2) displayed on the TV screen. 94
Dimmer (Front Display) Adjusts the brightness of the front display. 94
Display Set Short Message Selects whether to display short messages on the TV screen when the unit is operated. 94
Wallpaper Selects the image to be used as wallpaper on the TV. 95
Function Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 95
Trigger Output
Target Zone Specifies the zone with which tile TRIGGER OUT jack functions are synchronized. 95
DC OUT Power Mode Selects how to supply power through the DC OUT jack. 95
Memory Guard Prevents accidental changes to [he seHings. 96
Auto Power Standby Sets the amount of time for the auto-standby function. 96
ECO
ECO Mode Enables/disables the eco mode (power saving mode). 96
Language Select an on-screen menu language. 97
CONFIGURATIONS • Configuring various functions(Setup menu) I En 84