SOURCE
)ut selection
keys
keys
Resetting
remote
control
codes
You can reset a remote control code registered to each input
selection
key.
Press CODE SET.
SOURCE
blinks twice.
Perform each of the following
steps within 1 minute.
Otherwise,
the setting
will be canceled.
If this happens,
repeat from Step 1.
Press the input selection key.
Use the numeric
keys to enter
"5098".
Once the remote control code is reset successfully, SOURCE blinks
twice.
If it blinks six times, resetting has failed. Repeat from Step 1.
/% _®s®t the _mot®
_:;®'b®/to
fact®w
d®lsu/t settings
(_) Press CODE SET,
(_) Press RECEIVER.
_.3) Use the numeric keys to enter "9981".
CONFIGURATIONS
•
Controlling
external devices with the remote control
I
En104