Rename/Icon Select; Audio In; Decoder Mode - Yamaha RX-A730 Owner's Manual

Av
Hide thumbs Also See for RX-A730:
Table of Contents

Advertisement

_ Rename/Icon
Select
Changes the input source name and icon displayed
on the front display or TV screen.
Input sources
HDMI 1-5, V-AUX, AV 1-6, AUDIO 1-2, USB
Setup procedure
Use the cursor keys (<1/1>)to select a template and press the cursor key (v).
• You cannot change the template or icon for "USB" when an iPod is connected.
2
Use the cursor
keys
(<lib>) to select
an icon
and press
the cursor
key (V).
_
Press
ENTER
to enter
the name edit
screen.
_.
Use the cursor
keys and ENTER to rename
and select
"ENTER"
to confirm
the entry.
• To clear the entry, select "CLEAR".
_
Use the cursor
keys to select "OK"
and press ENTER.
_ Audio
In
Combines the video jack of the selected
input source with an audio jack of others. For
example, use this function
in the following cases.
• Connecting
a playback
device that supports HDMI video output, but not HDMI audio
output
• Connecting
a playback
device that has component
video jacks and analog stereo
jacks (such as game consoles)
Input sources
HDMI 1-5, AV 1-2
Setup procedure
(To input audio through a digital optical jack)
Select "AVI" or "AV4" and connect the device to the unit's corresponding
audio jacks
with a digital optical cable.
(To input audio through a digital coaxial jack)
Select "AV2" or "AV3" and connect the device to the unit's corresponding
audio jacks
with a digital coaxial cable.
(To input audio through analog audio jacks)
Select "AV5", "AV6", "AUDIO1 ", or "AUDIO2", and connect the device to the unit's
corresponding
audio jacks with a stereo pin cable.
_ Decoder
Mode
Sets the format of digital audio playback
to "DTS".
For example, if the unit does not detect DTS audio and outputs noise, set "Decoder
Mode" to "DTS".
Input sources
HDMI 1-5, V-AUX, AV 1-4
Settings
Auto (default)
Automatically
selects an audio format to match the input audio signal.
DTS
Selects DTS only. (Other audio signals are not reproduced.)
5
• To restore the default setting, select "RESET".
To exit from the menu,
press ON SCREEN.
CONFIGURATIONS
Configuring
input sources (Input menu)
I
En
76

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents