Operating The Unit From Zone2 (Remote Connection); Remote Connections Between Yamaha Products - Yamaha RX-A730 Owner's Manual

_ Operating the unit from Zone2
(remote connection)
You can operate the unit and external devices from Zone2 using the
supplied remote control if you connect an infrared signal
receiver/emitter to the unit's REMOTE IN/OUT jacks.
• To operate external devices with the supplied remote control, you must register a
remote control code for each device before using (p.102).
REMOTE IN/OUT jacks
Remote connections between Yamaha products
An infrared signal transmitter is not required if you are using
Yamaha products that support remote connections, as the unit
does. You can transmit remote control signals by connecting the
REMOTE IN/OUT jacks with monaural mini-jack cables and an
infrared signal receiver.
REMOTE IN/OUT jacks REMOTE IN/OUT jacks
The unit (rear)
Infrared signal
(such as a CD player)
Main zone
Infrared signal
receiver
Zone2
em cl
iili ...................................... • . ...... iiiil
Zone2
(up to six, including the unit)
PLAYBACK • Playing back musicin multiple rooms(multi-zone) I En 69