Wall Paper; Target Zone; Trigger Output; Trigger Mode - Yamaha RX-V673 Owner's Manual

❑ Wall Paper

Selects the image to be used as wallpaper on the TV.
Settings
Picture 1 (default), Displays the selected image on the TV screen when there is no video
Picture 2, Picture 3 signal.
Displays a gray background on the TV screen when there is no video
Gray
signal.
■

Trigger Output

Sets the TRIGGER OUT jack to function in sync with the power status of each zone or
input switching.

❑ Trigger Mode

Specifies the condition for the TRIGGER OUT jack to function.
Settings
The TRIGGER OUT jack functions in sync with the power status of the
Power (default)
zone specified with "Target Zone."
The TRIGGER OUT jack functions in sync with the input switching in
the zone specified with "Target Zone."
Source
An electronic signal is transmitted according to the setting made in
"Source."
Select this to manually switch the output level for electronic signal
Manual
transmission with "Manual."
Source
Specifies the output level of the electronic signal transmitted with each input, switching
when "Trigger Mode" is set to "Source".
Choices
HDMI 1–5, AV 1–6, V-AUX, AUDIO 1–2, TUNER, PHONO*, (network sources), USB
* RX-V773 only (except for U.S.A. and Canada models)
Settings
Stops the electronic signal transmission when you switch to the input
Low
source specified in this option.
Transmits the electronic signal when you switch to the input source
High (default)
specified in this option.
Manual
Switches the output level for electronic signal transmission manually when "Trigger
Mode" is set to "Manual". This setting can also be used to confirm proper function of
the external device connected via the TRIGGER OUT jack.
Choices
Low Stops the electronic signal transmission.
High (default) Transmits the electronic signal.

❑ Target Zone

Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Settings
When "Trigger Mode" is set to "Power," electronic signal transmission
is synchronized with the power status of the main zone.
Main
When "Trigger Mode" is set to "Source," electronic signal transmission
is synchronized with the input switching in the main zone.
When "Trigger Mode" is set to "Power," electronic signal transmission
is synchronized with the power status of Zone2.
Zone2
When "Trigger Mode" is set to "Source," electronic signal transmission
is synchronized with the input switching in Zone2.
When "Trigger Mode" is set to "Power," electronic signal transmission
is synchronized with the power status of the main zone or Zone2.
All (default)
When "Trigger Mode" is set to "Source," electronic signal transmission
is synchronized with the input switching in the main zone or Zone2.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
101
En