Controlling Other Components With The Remote Control; Setting Remote Control Codes; Resetting All Remote Control Codes - Yamaha RX-V2065 Owner's Manual

Controlling other components with the remote control

You can control external components for a selected input source with the remote control. The keys available for
controlling external components are as follows:
cSOURCE POWER
Turns on and off an external component.
jCursor, ENTER, RETURN
Operates the menus of external components.
kExternal component operation keys
Function as a recording or playback key of an external
component, or a menu display key.
lNumeric keys
Function as numeric keys of an external component.
mTV control keys
INPUT
Switches visual inputs of TV
MUTE
Mutes audio of TV
TV VOL +/– Controls the volume of TV
TV CH +/– Switches channels of TV
POWER Turns on and off TV
uDISPLAY
Switches between the screens of external components.
y
• You can use mTV control keys to control your TV regardless of a
selected input source if a remote control code for your TV is assigned to
dAV1, dAV4 or dPHONO (in the order of descending priorities).
• You need to set the remote control code first to control external
components.
• The remote control keys for controlling external components are
available only when the external components have corresponding control
keys.
The following remote control codes are assigned to input
sources as factory default settings.
■
Default remote control code settings
Input source Category
[HDMI 1] Blu-ray Disc
[HDMI 2] —
[HDMI 3] —
[HDMI 4] —
[AV 1] —
[AV 2] —
[AV 3] CD
[AV 4] —
[AV 5] —
[AV 6] —
[AUDIO 1] —
[AUDIO 2] —
[V-AUX] —
[PHONO] —
[MULTI] —
Default
Manufacturer
code
Yamaha 2018
— —
— —
— —
— —
— —
Yamaha 5013
— —
— —
— —
— —
— —
— —
— —
— —
Input source Category
[DOCK] DOCK
[TUNER] Tuner
[USB/NET] —
"—" indicates no assignment
y
• An external component controlled by the remote control is automatically
selected according to selection of the scenes (page 24).

Setting remote control codes

You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to "List of remote
control codes" at the end of this manual.
You should perform each step within 1 minute after the
previous step.
1
Press oCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
nTRANSMIT blinks twice.
2
Press the desired dInput selection key.
To use mTV control keys to control your TV,
assign a remote control code for your TV to dAV1,
dAV4 or dPHONO.
3
Press lNumeric keys to enter a remote
control code.
Once the remote control code is registered,
nTRANSMIT blinks twice. If it fails,
nTRANSMIT blinks six times. Repeat from
step 1.

Resetting all remote control codes

You can reset all remote control codes to the factory
default settings.
Note
• This operation also clears the programmed function of each key
(page 62).
1
Press oCODE SET on the remote control
using a pointed object such as a tip of a
ballpoint pen.
nTRANSMIT blinks twice.
2
Press iON SCREEN.
3
Press lNumeric keys to enter "9981".
Once the initialization is complete, nTRANSMIT
blinks twice. If it fails, nTRANSMIT blinks six
times. Repeat from step 1.
Default
Manufacturer
code
Yamaha 5011 (fixed)
Yamaha 5007 (fixed)
Yamaha — (fixed)
61
En