Hold; Switch Between Lines - AT&T 945 User Manual

€ € €
€ €
w w w w w w w w w w w w
w w w w w w w w
€ € €
€ €
w w w w w w w w w w w w
w w w w w w w w

Hold

Press and release H. The LINE light for the line on
hold flashes slowly in green, and a double-beep sounds
every 30 seconds to remind you the call is on hold.
(To turn off the reminder beep, see "Turn Hold Reminder
On or Off" on page 33.) You can replace the handset
in the cradle without disconnecting the call. The
speakerphone is automatically turned off.
To release Hold, press and release the LINE button
of the call on hold.
NOTE: The phone automatically disconnects
a call on hold after 20 minutes. To keep a call
on hold longer than 20 minutes, release Hold before
20 minutes and then place the call on hold again.
NOTE: You cannot put an intercom call on hold.
NOTE: If a line is in use, pressing I will
place the line on hold and activate the intercom.

Switch Between Lines

Press and release H to keep a call on
1
the first line.
2 Press and release the LINE button of another
line to make or answer another call.
NOTE: If you switch lines without pressing H
first, you will drop the call.
63