Volume; Redial - AT&T 945 User Manual

€ € €
€ €
x x x
x x
x x x
x x

Volume

Handset/Speakerphone/Headset Volume
Control
When you are on a call, press VOLUME + to increase
call volume. Press VOLUME - to decrease volume.
You will hear a beep when you reach the minimum
or maximum level.
Ringer Volume
When the phone is ringing, press VOLUME + or
VOLUME - to adjust the ringer volume.This phone
has four ringer volume levels. As you adjust the ringer,
you will hear the ring change.
Turning Ringer Off
You may turn the ringer for each line on or off. For
detailed instructions see "Turn the Ringer On/Off for
Each Line" on page 23.

Redial

The last number dialed on this phone (up to 32 digits) is
stored in redial memory until you dial another number.
Handset
To dial the same number again, lift the handset, listen
for the dial tone, then press R.
Speakerphone or Headset
To dial the same number again, press a LINE button,
then press R. The phone automatically dials
the last number.
NOTE: You will experience a delay before the call
is dialed when using the Redial feature. This is normal.
61