Middle Axle Disassembly - Polaris 2004-2005 Sportsman 6x6 Service Manual

7. Remove the jam nut (D) and locking middle axle
hub (E).
G
8. Remove swing arm housing (F), bearing spacer
(G), and O-rings (H). Discard O-rings. Inspect
bearing and seals, replace if worn or damaged.
9. Remove the 30 tooth spocket (J) and the 38 tooth
sprocket (K).
7.22
F
H
K
J
GENERAL INFORMATION
10. Remove rear brake caliper. Support with wire or
tie strap. Do not hang caliper by brake line.
11. Slide axle assembly out left side of housing.
CONCENTRIC SWINGARM

MIDDLE AXLE DISASSEMBLY

1. Remove rear axle. (See Page 7.28)
C
A
B
2. Remove retaining ring (A), nut retainer (B), and
foam seal (C).
F
E
D