Polaris 2004-2005 Sportsman 6x6 Service Manual page 250

ELECTRICAL
SPEEDOMETER TROUBLESHOOTING - - 2005 MODELS
TEST 7 SHIFT INDICATOR NOT WORKING (TRANSMISSION SWITCH)
Operation:
The Instrument cluster sends signals from the #12, #13, #14
and #15 output wires on the connector to the transmission
switches. These signals complete their path on the Brown
wire at the front transmission switch. Depending on switch
position, the Instrument cluster displays the corresponding
shift indicator in the LCD panel.
Testing:
Use the diagram provided to test the continuity loop at each
of the shift points with a multi- -meter. Replace Instrument
cluster if no connection problems are found.
10.22
51 WHT/BLU
14 GRN/WHT
35WHT
32 BRN/R
28 PUR
50 BLU/R
35WHT
16 Pin Connector
1. Orange/White- - 12V Ignition Switch
2. Red/White- - 12V ETC and AWD Switch
3. Grey/Orange- - Mode/Override button
4. Black- - Ignition Kill
5. Green- - N/C
6. Blue- - N/C
7. Yellow/Red- - RPM Input
8. Brown- - Instrument Ground
9. Blue White- - Engine Overheat Switch
10. N/C
11. N/C
12. Purple- - F Trans Switch - - Reverse
13. Green/White- -R Trans Switch - - Neutral
14. White/Blue- - R Trans Switch - - Low
15. Blue/Red- - F Trans Switch - - High
16. Brown/White- - AWD Coil