Mixer - Honeywell MX7 Tecton User Manual

Mixer

The MX7 Tecton has a speaker located above the scan button. It is active when a headset is not connected to the device.
Use the settings on these panels to adjust the volume, record gain and sidetone for microphone input, speaker and speaker
output.
Headsets can be enabled, disabled and selected using these panels.
Setting
Output
Speaker Volume
Headset Volume
Input
Input
Record Gain
Boost
Sidetone
Tap and hold the sliders and move them either left or right, or tap the left and right arrows, to adjust decibel levels.
Tap the Test button on the Output panel to hear a changed setting.
Default
6.0 dB
3.0 dB
Mic1
24.0 dB
+ 30.0 dB
6.0 dB / Disabled
5 - 39