Lock - Honeywell MX7 Tecton User Manual

Lock

Password
Set the lock / unlock behavior for the MX7 Tecton.
Setting
Prompt if device unused for
Timer
Password type
Password
Confirm
Password hint
Prompt if phone unused for
Tap the check box and set the inactivity timeout before the MX7 Tecton locks.
Password type
When selecting a Password type the MX7 Tecton displays a numeric keypad or the input panel depending on the
type of password selected.
Select the Password type, Simple PIN (numeric) or strong alphanumeric. Enter the desired password and confirm.
Note that Windows Mobile places restrictions on what it considers a valid password. If the chosen password is not
strong enough, a warning is displayed and a new password should be entered and confirmed.
Note: After a password has been entered, the password must be used to access the Lock panels again.
5 - 16
Default
Unchecked
0 minutes
Simple PIN
<blank>
<blank>
<blank>