Main - Honeywell MX7 Tecton User Manual

Switch Control to SCU
1. To switch back to SCU control, select any other profile except ThirdPartyConfig in the SCU Active Config drop
down list on the Main tab.
2. A message appears that a Power Cycle is required to make settings activate properly.
3. Tap OK.
4. Open the Registry panel and tap Warmboot. Radio control is passed to the Summit Client Utility.

Main

Setting
Admin Login
Radio
Active Config/Profile
Regulatory Domain
The Main tab displays information about the wireless client device including:
• SCU (Summit Client Utility) version
• Driver version
• Radio Type (ABG is an 802.11 a/b/g radio).
• Regulatory Domain is preset to either Worldwide or a location specific domain (FCC, ETSI, KCC or TELEC).
• Copyright Information can be accessed by tapping the About SCU button
• Active Config profile / Active Profile name
• Status of the client (Down, Associated, Authenticated, etc.).
The Active Profile can be switched without logging in to Admin mode. Selecting a different profile from the drop down list
does not require logging in to Administrator mode. The profile must already exist. Perform a Suspend/Resume function
when changing profiles. Profiles can be created or edited after the Admin login password has been entered and accepted.
When the profile named ThirdPartyConfig is chosen as the active profile, the Summit Client Utility passes control to Wire-
less Manager for configuration of all client and security settings for the network module.
The Disable Radio button can be used to disable the network card. Once disabled, the button label changes to Enable
Radio. By default the radio is enabled.
Default
SUMMIT
Enabled
Default
Varies by location
11 - 5