Honeywell MX7 Tecton User Manual page 228

Adapters
Note: Review the MX7 Tecton network settings configuration utilities and the default values before setting All Adapters
to Enable in the Adapters applet.
Setting
Manage Network Settings
Manage Wireless Settings
Current Adapter
Primary Adapter
Icon on taskbar
Use Avalanche Network Profile The Enabler will apply all network settings sent to it by the Mobile Device Server.
Avalanche Icon (varies by En-
abler version)
or
Use Manual Settings
Properties Icon
Note: A reboot may be required after enabling or disabling these options.
10 - 18
.
Function
When enabled, the Enabler will control the network settings. This parameter cannot
be configured from the Avalanche Mobility Center Console and is enabled by default.
When enabled, the Enabler will control the wireless settings. This parameter cannot
be configured from the Avalanche Mobility Center Console and is disabled by default.
For Summit clients, Manage Wireless Settings should not be checked because con-
figuration packages provide more radio configuration options.
Lists all network adapters currently installed on the MX7 Tecton.
Indicates if the Enabler is to attempt to configure the primary adapter (active only if
there are multiple network adapters).
Places the Avalanche icon in the Avalanche taskbar that may, optionally, override the
standard Windows taskbar.
Selecting the Avalanche Icon will access the Avalanche Network Profile tab which
will display current network settings.
When enabled, the Enabler will ignore any network or wireless settings coming from
the Avalanche MC Console and use only the network settings on the MX7 Tecton.
Selecting the Properties icon displays the Manual Settings Properties dialog applet.
From here, the user can configure Network, DNS, Authentication and Wireless pa-
rameters using the displays shown below. Note the authentication tab may not be
present in all versions of the Enabler.