Power Connector Port; Battery Charger; Electrical; Temperature - Honeywell MX7 Tecton User Manual

Power Connector Port

Note: When an external power supply is used to power these products, the external power supply should be UL Listed, with
LPS or Class 2 outputs rated 12V, minimum 2 Amps.
Pin Signal
1 Ground (CG)
2 Return (-)
3 +12V (+)
The Power connector is located on the back of the vehicle cradle.

Battery Charger

Li-Ion 7.4V 2.2Ah battery with a 500 charge/discharge life cycle.
Battery: MX7 Tecton

Electrical

Note: Battery packs may leak up to 1mA current through the battery contacts when left in a non-powered battery charger
charging pocket.
Parameter
Power Supply Input Voltage (V AC-IN)
Power Supply Input Frequency (freq)

Temperature

Function
Operating
Battery Pack Charging
Storage

Dimensions

Category
Weight
Length
Width
Height
Plug Type
Wire Color
Green
Blue
Brown
Minimum Maximum
0°C (32°F) +40°C / (104°F)
0°C (32°F) +40°C / (104°F)
-20°C (-4°F) +70°C / (160°F)
Dimension
1.75 lbs / .79 kg
12.25" / 31.1 cm
5.25" / 13.3 cm
1.5" / 4 cm
IEC320 (3 prong, grounded)
Minimum Maximum
100 VAC 240VAC
47Hz 63Hz
Note
Battery packs will not begin charging when their inter-
nal temperature is outside this range.
Unit is off.
Note
Auto-switching
15 - 5