Honeywell MX7 Tecton User Manual page 177

Mesa - Advanced Properties
UPCA – When enabled, decode UPCA Mesa. Default is disabled.
EAN13 – When enabled, decode EAN 13 Mesa. Default is disabled.
Code39 – When enabled, decode Code 39 Mesa. Default is disabled.
Code128 – When enabled, decode Code 128 Mesa. Default is disabled.
Interleaved 2 of 5 – When enabled, decode Interleaved 2 of 5 Mesa. Default is disabled.
Code93 – When enabled, decode Code 93 Mesa. Default is disabled.
When the Mesa symbology is chosen on the Symbology panel (the Enable check box is checked) the Advanced
button must be clicked and the desired Mesa Advanced Properties sub-symbology selected.
When Mesa is disabled on the Symbology panel (the Enable check box is cleared), tap the Advanced button and
uncheck all parameters or sub-symbologies, on the Mesa Advanced Properties panel.
Note: The root symbology (UPCA, EAN13, Code39, Code128, Interleaved 2 of 5 and/or Code 93) must be enabled
before the matching enabled Mesa sub-symbology will decode.
8 - 21