External Connectors; Usb Connectors; Audio Connector; Power Supply Connector - Honeywell Marathon Reference Manual

External Connectors

The following external connectors are located on the Marathon:
Two USB 2.0 Host ports
l
External power supply connector.
l
Audio connector is a 3.5 mm jack for a headset.
l
Docking connector on bottom for use with vehicle mounted dock or desktop dock
l
External antenna signal pathways on bottom for use with vehicle mounted dock.
l
COM 1 is accessible when docked in a vehicle mounted or desktop dock.
l
COM 2 is reserved for add-on modules (imager or magnetic card reader).
l

USB Connectors

There are two USB 2.0 Host ports, located on the

Audio Connector

The Audio connector is a standard 3.5mm connector for an external headset, located on the
cover.

Power Supply Connector

The power connector is a barrel style connector, located on the
supplied to the Marathon through the power connector.
The Marathon power supply connector accepts DC input voltage at 19 Volts.

Antenna Signal Pathway

The external GPS and WWAN antenna signal pathways are located on the
originate from the external GPS and WWAN antenna connectors on the vehicle dock. No physical antenna connects directly to
these ports on the Marathon.

Docking Connector

The docking connector is located on the
Marathon desktop and vehicle mounted dock, allowing the Marathon to interface with USB, serial or other ports present on the
selected dock.
2-4
right side and protected by a sliding cover.
left side
bottom of the Marathon. The connector interfaces with the matching connector in the
left side
and protected by a sliding cover. AC/DC power is
bottom of the Marathon. The antenna signals
and protected by a sliding