Glide-Out Grill - Stanley Supreme Deluxe 90 Induction User Manual & Installation & Service Instructions

Fig. 5-2
Fig. 5-3
Fig. 5-4
Fig. 5-5
ArtNo.331-0005 Removing the grill rail

Glide-out Grill

Before you remove any of the grill parts for cleaning,
n n
make sure that they are cool, or use oven gloves.
The grill pan and trivet should be washed in hot soapy water.
Alternatively, the grill pan can be washed in a dishwasher.
After grilling meats or any foods that soil, leave to soak for
a few minutes in the sink immediately after use. Stubborn
particles may be removed from the trivet by using a nylon
brush.
The grill pan can be easily removed for cleaning as follows:
Remove the grill pan support frame by pulling the grill pan
forward (Fig. 5-2).
Lift the grill pan clear of the support frame. The support frame
is held to the side rails by two clips on each side (Fig. 5-3).
For each side, support the side rail with one hand and with
the other hand lift the frame up and out of the side clips (Fig.
5-4).
For safety, push the side rails back into the grill chamber.
If you need to remove the side rails to allow cleaning of the
grill chamber, you can unhook them from the grill chamber
sides (Fig. 5-5) and wipe the sides clean with a soft cloth and
mild detergent.
DO NOT put the side runners in a dishwasher.
Once you have finished, hook the side rails back onto the
sides of the chamber. To refit the frame, pull the side rails
forward and, for each side in turn, support the side rail and
press the frame down into the side rails.
Replace the grill pan.
18