Honda GX630 Owner's Manual page 5

3. Move the throttle lever away from the MIN. position, about 1/3
of the way toward the MAX. position.
MIN.
Some engine applications use a remote-mounted throttle control
rather than the engine-mounted throttle lever shown here. Refer to
the instructions provided by the equipment manufacturer.
4. Turn the engine switch to
the ON position.
ON
5. Operate the starter.
Turn the engine switch to the START
position, and hold it there until the
engine starts.
If the engine fails to start within 5
seconds, release the engine switch,
and wait at least 10 seconds before
operating the starter again.
Using the electric starter for more
than 5 seconds at a time will
overheat the starter motor and can
damage it.
When the engine starts, release the
engine switch, allowing it to return to
the ON position.
THROTTLE LEVER
ON ON
ON ON
6. Warm up the engine for 2 or 3 minutes.
7. If the choke knob was pulled to the CLOSED position to start
the engine, gradually push it to the OPEN position as the engine
warms up.
MIN.
CHOKE KNOB
STOPPING THE ENGINE
To stop the engine in an emergency, simply turn the engine switch
to the OFF position. Under normal conditions, use the following
procedure. Refer to the instructions provided by the equipment
manufacturer.
1. Move the throttle lever to the MIN. position.
Some engine applications use a remote-mounted throttle control
ENGINE
rather than the engine-mounted throttle lever shown here.
SWITCH
START
2. Turn the engine switch to the OFF position.
START
ENGINE
OFF
SWITCH
3. If the fuel tank is equipped with a valve, turn the fuel valve to
the CLOSED or OFF position.
ENGLISH
OPEN
CLOSED
MIN.
THROTTLE LEVER
OFF
ENGINE SWITCH
MIN.
5