Aastra 6737i User Manual page 53

Softkey Type
Speeddial/Xfer
Speeddial/Conf
Directory
Callers List
Redial
Conference
Transfer
Intercom
Services
Phone Lock
Paging
Empty
In the Aastra Web UI, the operational states for each softkey display enabled. To disable a state, you uncheck the box for
that state.
Key Display Behavior
On the 6737i IP Phone, you can configure up to 20 functions on the bottom softkeys. If you have no softkeys configured on
the IP Phone, and you assign softkey functions to higher number keys in the Aastra Web UI, the key functions automati-
cally appear in the first available position on the LCD display.
For example, if the bottom softkeys 1 through 20 are set to "None", and you set softkey 12 as the following:
Type: speeddial
Label: LAB
Value: 3456
after saving the settings, the "LAB" label actually appears in position 1 of the LCD.
A softkey function of "None" does not display on the idle screen at all.
41-001452-05 REV01 – 04.2014
Default States
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
All states disabled.
All states disabled.
Idle, Connected, Incoming, Outgoing, Busy
Line Keys and Softkeys
47