Aastra 6737i User Manual page 152

Managing Calls
14. For the "No Answer" state, in the "No. Rings" field, enter the number of times that the account rings before
forwarding the call to the specified number. Valid values are 1 through 20. Default is 3.
When using the "Account" mode or "Custom" mode, you can enter a different number of rings for each account.
If you use the Aastra Web UI to change the Call Forward Key Mode to "Phone", all accounts synchronize to Account 1
15. Click Save Settings.
The changes takes affect immediately without a reboot.
Using CFWD via the IP Phone UI
Once CFWD is enabled on your phone, you can access and change the configuration using the IP Phone UI or the Aastra
Web UI. You can access the CFWD menus by pressing a pre-configured Call Forward key, or by selecting Options->Call
Forward from the IP Phone UI.
The following procedure assumes you have already configured a CFWD key AND assumes there are three accounts con-
figured on the phone.
Notes:
• If there is no CFWD key configured on the phone or it is removed, you can still enable CFWD via the IP Phone UI at the
path Options->Call Forward.
• If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves as if
the mode was set to "Phone"
• Using the Aastra Web UI, if you change the CFWD key mode to "Phone", all accounts synchronize to the current set-
ting of Account 1.
146
41-001452-05 REV01 – 04.2014