Configuring Tcp/Ip In Windows 2000 Or Xp - Motorola Communications Gateway User Manual

Introduction Before You Begin
Home Print
Installation & Configuration

Configuring TCP/IP in Windows 2000 or XP

The following instructions are for Windows 2000 or XP. For Windows 95, 98, or Me, see
"Configuring TCP/IP in Windows 95, 98, or Me"
system, refer to your user guide.
1
On the Windows Desktop, click Start.
2
Select Settings and then Control Panel from the pop-up menus.
3
On the Control Panel window, double-click the Network and Dial-up Connections
icon.
4
On the Network and Dial-up Connections window, click Local Area Connection
number. The value of number varies from system to system. The Local Area
Connection number Status window is displayed.
X
Exit
Troubleshooting
36
Communications Gateway User Guide
FAQ Glossary
on page 33. For a Macintosh or UNIX
License