Connector Panel - Motorola Communications Gateway User Manual

Introduction Before You Begin
1 2 3 4 5 6
Home Print
Installation & Configuration

Connector Panel

The connector panel provides cabling connectors and Ethernet status lights.
7 8 9
X
Exit
Troubleshooting
Item Description
1 The standard RJ-11
lines 1 and 2
2 When this light is on (green), the
when data is being transferred.
3 The Ethernet port provides a connection to Ethernet equipped computers
using a cable terminated with an
4 This light is on (green) for a 100Base-T link and off for a 10Base-T link.
5 The USB port provides a connection to
6 The Coax port provides a connection to the
7 If you experience a problem, you can push this recessed button to reset
the Communications Gateway (see
Resetting may take 5 to 30 minutes because the Communications
Gateway must find and lock on the appropriate communications channels.
8 and 9 These labels provide the cable data and telephony
5
FAQ Glossary
telephone ports provide connections for telephone
Ethernet connection is available. It blinks
RJ-45 connector.
USB equipped computers.
coaxial cable (coax)
"Troubleshooting"
Communications Gateway User Guide
License
outlet.
on page 54).
MAC addresses.