Configuring Tcp/Ip In Windows 95, 98, Or Me - Motorola Communications Gateway User Manual

Introduction Before You Begin
Home Print
Installation & Configuration
Configuring TCP/IP in Windows 95, 98,
or Me
The following instructions are for Windows 95, 98 and Me. For Windows 2000 or XP, see
"Configuring TCP/IP in Windows 2000 or XP"
system, refer to your user guide.
1
On the Windows Desktop, click Start.
2
Select Settings and then Control Panel from the pop-up menus.
3
Double-click the Network icon on the Control Panel window.
4
Select the Configuration tab on the Network window.
5
If TCP/IP is displayed in the list of network components, it is installed and you can
skip to step 10. If TCP/IP is not displayed on the list, continue with step 6.
X
Exit
Troubleshooting
Although your Motorola Communications Gateway model
number may be different than in the images in this guide, the
procedure is the same.
33
Communications Gateway User Guide
FAQ Glossary
on page 36. For a Macintosh or UNIX
License