Motorola Communications Gateway User Manual page 71

Introduction Before You Begin
Home Print
Installation & Configuration
Troubleshooting, continued
22
Click Remove Driver.
Informational messages similar to the ones shown at left are displayed on the
Motorola USB Driver Removal Utility window. If a window similar to the following is
displayed, click OK. You can ignore the error message.
After you remove the USB driver, re-install the USB driver following one of:
"Setting Up a USB Driver in Windows 2000"
I
"Setting Up a USB Driver in Windows XP"
I
If you continue to have problems, contact your service provider.
X
Exit
Troubleshooting
on page 31
66
Communications Gateway User Guide
FAQ Glossary
License
on page 26