Motorola Communications Gateway User Manual page 23

Introduction Before You Begin
Home Print
Installation & Configuration
Cabling and Startup for a Single User, continued
17
Immediately plug the power cord into the electrical outlet.
This turns your Motorola Communications Gateway on. You do not need to unplug it
when not in use.
18
Check that the lights on the Communications Gateway cycle through this sequence:
I
I
X
Exit
Troubleshooting
Power flashes during the self-test and changes to solid green when the self-test
is successfully complete.
Online flashes while the Communications Gateway downloads its
data and changes to solid green when the download is complete.
18
Communications Gateway User Guide
FAQ Glossary
License
configuration