Precautions - Motorola Communications Gateway User Manual

Introduction Before You Begin
To avoid damaging your
Communications Gateway or
computer with static electricity:
Always make the wall
connection first.
Before you connect or disconnect
the USB or Ethernet cable, always
touch the coaxial cable connector
on the Communications Gateway.
Home Print
Installation & Configuration

Precautions

Postpone Communications Gateway installation until there is no risk of thunderstorm or
lightning activity in the area.
To avoid damaging the Communications Gateway with static electricity:
Always first connect the coaxial cable to the grounded cable TV wall outlet.
I
Before you connect or disconnect the USB or Ethernet cable from your
I
Communications Gateway or PC, always touch the coaxial cable connector on the
Communications Gateway to release any static charges.
To prevent overheating the Communications Gateway, do not block the ventilation holes.
Do not open the Communications Gateway. Refer all service to your service provider.
Wipe the Communications Gateway with a clean, dry cloth. Never use cleaning fluid or
similar chemicals. Do not spray cleaners directly on the unit or use forced air to remove
dust.
X
Exit
Troubleshooting
8
Communications Gateway User Guide
FAQ Glossary
License