Motorola Communications Gateway User Manual page 30

Introduction Before You Begin
Home Print
Installation & Configuration
Setting Up a USB Driver in Windows 98 SE, continued
After all the necessary files are loaded, the window at upper left is displayed
confirming a successful installation.
10
Click Finish. The window at bottom left is displayed.
11
Click Yes to restart your computer.
When you have successfully finished setting up the USB driver, you can continue with
"Configuring TCP/IP in Windows 95, 98, or Me"
If you have difficulties setting up the USB driver, perform the procedure for
USB Driver from Windows 98 or Me"
does not correct your problem:
Contact your service provider
I
See the Software License and Warranty Information card provided with your
I
Motorola Communications Gateway for information about obtaining warranty
service.
X
Exit
Troubleshooting
on page 57 and then repeat this procedure. If that
25
Communications Gateway User Guide
FAQ Glossary
on page 33.
"Removing the
License