Configuring Tcp/Ip In Windows 2000 Or Xp - Motorola SURFboard Cable Modem User Manual

Introduction Before You Begin
Home Print
Installation & Configuration

Configuring TCP/IP in Windows 2000 or XP

The following instructions are for Windows 2000 or XP. For Windows 95, 98, or Me, see
"Configuring TCP/IP in Windows 95, 98, or Me"
system, refer to your user guide.
1
On the Windows Desktop, click Start.
2
Select Settings and then Control Panel from the pop-up menus.
3
Double-click the Network and Dial-up Connections icon on the Control Panel
window.
4
On the Network and Dial-up Connections window, click Local Area Connection
number. The value of number varies from system to system. The Local Area
Connection number Status window is displayed.
X
Exit
Troubleshooting
26
SURFboard Cable Modem User Guide
FAQ Glossary
on page 23. For a Macintosh or UNIX
License