Filling The Clean Solution Tank; Transporting Cleaner; Carrying Cleaner; The Tanks - Hoover SteamVac Owner's Manual

Transporting cleaner

2.2

The Tanks

Clean solution tank (upper tank)
The clean solution tank holds the cleaning
solution that is to be dispersed onto the sur-
face to be cleaned (see "Cleaning Products"
on p.11 for details).
How to fill
Disconnect carpet cleaner from electrical
outlet.
Place carpet cleaner handle in the upright,
locked position.
2.6
5 OUNCES/
150 ml
A
Pour detergent into
tank. Fill tank to fill
line (B) (1 gallon)
with hot tap water.
To assure proper
performance, use
only HOOVER
cleaning detergent
(see "Cleaning
Products" section
for details.).
www.hoover.com
To move your
carpet cleaner from
room to room put
handle in upright
and locked position
tilt carpet cleaner
back on wheels and
push forward.
Turn cap (A) upside
down to serve as a
measuring cup.
2.7
B

Carrying cleaner

2.3
2.4
To remove tank,
press down on
handle and pull
forward.
Carry tank to a sink.
Using cap, measure detergent following the
chart below.
Tank Measuring Chart
For carpet, carpeted
stairs and upholstery:
For bare floors:
For heavy traffic areas:
Pre-treat with HOOVER Spot and Stain Spray
Cleaner.
If you do not have access to the Spot and
Stain Spray Cleaner, double the amount of
HOOVER Detergent (use 2 capfuls or 10
ounces per 1 gallon tank). If using ultra-
concentrated detergent, be sure to follow
directions on bottle.
10
The carpet cleaner
may also be lifted
by placing a hand
under the upper
clean solution tank
handle as shown.
2.5
Rotate tank cap
counterclockwise
and lift up to re-
move cap.
Fill cap to fill line (5 ounces)
with HOOVER Carpet/Uphol-
stery Detergent.
Fill cap to fill line (5 ounces)
with HOOVER Hard Floor
Cleaning Solution.