Filling Your Floormate Cordless Clean Water Solution Tank - Hoover FloorMate Cordless Instruction Manual

Filling your FloorMate
NOTE: When facing your FloorMate
RIGHT
FRONT
1
2
Squeeze here and
pivot the tank out.
To prevent damage to wood floors follow manufacture's cleaning recommendations. If using cleaner
on sealed wood floors, inspect floor surface for worn finish, bare wood or separated joints. Do not use
Hoover 2x multi-floor plus cleaning solution to clean sealed wood floors if any of these conditions exist.

See us do it:
hooverhelp.com/FloorMateCordless3
® Cordless clean water solution tank

® Cordless, the clean water tank is on the right.

3
Twist the cap Fill with hot tap
counter-clockwise water up to the
and lift up to fill line.
remove.
CAUTION
! !
4
Use your cap as
a measuring cup.
Fill with Hoover® 
2X Multi-Floor Plus
Cleaning Solution
once and pour into
the solution tank.
Always refer to the floor
surface manufacturer's
guidelines.
RIGHT
FRONT
5
Replace cap and
snap the tank
back into its
original position.
6