Table of Contents
Advertisement
Getting Started
Oven Bottom
Combustion Vents (slide-in models
only)
Oven Vent
Automatic Shutoff
Self Cleaning
Indicators and Other Features
Cooling Fan (Slide-in models only)
Convection Fan
Control (Panel)
English 12
Caution: Do not place food directly on oven bottom. Do not use aluminum foil or
protective liners to line any part of an appliance, especially surface unit drip
bowls or oven bottom. Installation of these liners may result in a risk of electric
shock or fire.
The combustion vents are located along the back edge of the cooktop. They
allow the burners to operate properly. Do not block these vents.
CAUTION: DO NOT block combsustion vents. Blocked vents could lead to fire
or unintentional release of carbon monoxide.
Free-standing Models:
The oven vent is located below the display above the rear left cooktop burner. It
is normal to see steam escaping from the vent and condensation may collect on
the backguard and cooktop. This area may become hot when the oven is
in use. To prevent carbon monoxide build-up, do not block the vent. The
oven vent is also important for air circulation.
Slide-in Models:
The oven vent is located above the oven door handle. Warm air may be
released from the vent before, during and after cooking. It is normal to see
steam escaping from the vent and condensation may collect in this area. This
area may be warm when the oven is in use. Do not block the vent as it is impor-
tant for air circulation.
The oven will automatically shut off after 12 hours (24 hours if the time format is
set for 24 hour in the Select Function section).
The oven features a self-cleaning function that eliminates the manual labor
involved with cleaning your oven.
Beep - Signals that more information must be entered or confirms the receipt of
an entry. A Beep also signals the end of a program or an oven error.
End-of-Cycle Indicator - To indicate when a mode is finished, 3 consecutive
beeps will sound.
Default Settings - The cooking modes automatically select the default tempera-
ture. These can be changed when a different one is needed.
Flashing Symbol or Number - Signals an incomplete setting and calls for
another step or START to be pressed.
F Number Codes -These codes display when there is a problem with the range.
The cooling fan runs during all modes. You may hear it running and you may
feel warm air as it is released from the oven vent. This is normal.
The convection fan operates during any convection mode. When the oven is
operating in the convection mode, the fan will turn off automatically when the
door is opened. The convection fan does run during self-clean, although not at
the beginning of the mode.
Note: On some models, the convection fan also runs during preheat for the
bake mode.
Advertisement
Table of Contents
