Bosch HDI7032C Use And Care Manual page 12

Getting Started
Extension Oven Rack (some models)
English 10
The Full Extension Rack allows for easier access to cooking foods. The bottom
section extends as far as the standard flat rack. However, the top section
extends beyond the bottom section bringing the food closer to the user. To order
a full extension rack, contact Service or a dealer near you.
Top Rack
Bottom
Rack
Removing and Replacing
Note: The full extension rack must be in the closed position when removing and
replacing. Grasp the entire rack (both sections).
1. Grasp the bottom section and pull straight out.
2. Once the stop is reached, grasp the top section and pull straight out until the
second stop is reached. If the top rack will not extend fully, it is not installed
correctly. Reinstall it so that the pan stop is in the back of the oven.
Disassembly (for cleaning)
The two sections of the rack are designed to come apart for easier cleaning.
1. Place rack on flat surface in the closed position top side up.
2. Rotate one side of top rack towards you until it is past the stop (ball).
3. Pull the rack up and out, rotated side first.
Closed Position
Reassembly
CAUTION
Always verify that top rack is installed correctly after reassembly.
The back edges of the top rack must be under the rack guide on the
bottom rack. DO NOT simply rest the top rack on top of the bottom
one.
Back of Rack
Stops
Front of Rack
Figure 9: Full Extension Rack
Back of Rack
Front of Rack
Pan Stops
Top Rack
Stop (Ball)
Rack Guide
Top Rack Rest
Stop (Ball)
Figure 10: Disassembly