Table of Contents
Advertisement
Electronic Ignitor
High Power Burner
Precision Burner
Oven Racks
Flat Oven Racks
The cooktop uses electronic ignitors to light the burners, There is no pilot light.
Each burner has its own ignitor. For proper operation, keep the ignitor clean and
dry. It is necessary to clean these when there is a boilover or when the burner
does not light even though the ignitor clicks.
Caution: All ignitors spark when any single burner is turned on. Do not touch
any of the burners when the cooktop is in use.
The high power burner is the largest burner. It is the most powerful burner on the
cooktop. It retains heat longer than normal burner caps and, at low settings, pro-
hibits the flame from touching the cookware. This results in a gentle, more pre-
dictable heat. Use the low settings on this burner to simmer large amounts of
sauces or soups. Use the high settings to quickly bring large amounts of water to
a boil.
The precision burner is the smallest burner on the cooktop. It is well suited for
gentle cooking of small amounts of food. Use the burner to melt butter or choco-
late or to prepare delicate sauces.
Depending on model, the range is equipped with one of the following combina-
tions:
•
Three flat racks
•
Two flat racks and one full extension rack
•
Two flat racks and one half rack
The racks are designed with a stop so they will stop before coming completely
out of the oven and not tilt.
CAUTION
To avoid burns, place oven racks in desired positions before turning
oven on. Always use oven mitts when the oven is warm.If a rack
must be moved while the oven is hot, do not let oven mitts contact
hot burners.
Inserting Racks Into Oven
1. Grasp rack firmly on both sides.
2. Tilt rack up to allow stop into rack guide.
3. Bring rack to a horizontal position and press the rest of the way in. Rack
should be straight and flat, not crooked.
Back of rack
Front of rack
Removing Flat Racks From Oven
1. Grasp rack firmly on both sides and pull rack toward you.
2. When the stop is reached, tilt rack up and pull the rest of the way out.
Insert rack with the back of the rack
toward the back wall of the range.
Getting Started
Figure 8: Inserting a Rack
English 9
Advertisement
Table of Contents
