Bosch HDI7032C Use And Care Manual page 9

Sealed Gas Burners
Burner Caps
Burner Grates
The cooktop has sealed gas burners. As a result, there are no parts under the
cooktop to clean, disassemble or adjust. Spills stay on top of the cooktop where
they are easier to wipe up.
The cooktop has four burner caps. Match the size of the burner cap to the size of
the burner. Burner caps are not interchangeable.
Make sure the burner cap is completely seated on the burner base before
attempting to light the burner. If the burner cap is not placed correctly, the burner
may not light or the flame may not burn completely or correctly. The appliance is
equipped with two types of burners: standard and diffusion. See the sections
below for further information on each.
Diffusion Burner Caps
Depending on the model, the appliance is equipped with either 2 or 4 diffusion
burner caps. They provide a more even heat, espceially when cooking at lower
temperatures.
Warning: To prevent flare-ups, do not use the cooktop without all
burner caps and all burner grates properly positions. Do not use a grate
if the feet are missing or damaged.
Models with Stainless Steel Cooktop:
There are two burner grates: one for the left side of the cooktop and one for the
right side of the cooktop. Position them so that the circular opening is over the
burner cap. Burner grates should rest flat on the cooktop. The rubber feet on the
grates should rest in the indents on the cooktop.
Burner Grate
Figure 3: Right Side Burner - Side View
Left Side Right Side
Burner Grate
Figure 4: Grates for Free-standing Models
Getting Started
Burner Grate
Burner Cap
Burner
Cooktop
Ignitor
English 7