CLUTCH
3. Install:
• one-way clutch bearing
NOTE:
The one-way clutch bearing should be
installed in the clutch carrier assembly with the
arrow mark a facing toward the clutch hous-
ing.
4. Install:
• dowel pins
• gasket
New
• clutch housing assembly
NOTE:
• Tighten the bolts in stages, using a criss-
cross pattern.
• After tightening the bolts, check that the
clutch housing assembly to counterclockwise
rotates smoothly.
4 - 65
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)