Yamaha 2004 YXR660 Service Manual page 335

Table of Contents

STEERING SYSTEM

Ball joint remover/installer set

P/N. 90890-01474

Ball joint adapter set

P/N. YM-01474

Ball joint remover/installer attach-

P/N. YM-01477

Remover washer

Remover spacer

Installer spacer

Installer guide

d. Install the body 3, short bolt 5, remover

washer 6 and remover spacer 7 onto the

• Remover washer 6 must be aligned with the

projection on the head of the ball joint.

• Surface a of the remover spacer 7 must be

aligned with the surface b of the steering

e. Hold the body 3 in place while turning in

the short bolt 5 to remove the ball joint A

from the steering knuckle.

f. Remove the ball joint remover/installer.

g. Install the long bolt 4, installer spacer 9

and installer guide 0 onto the body 3.

Chapters

Table of Contents