Chassis; Adjusting The Brake Pedal - Yamaha 2004 YXR660 Service Manual

ADJUSTING THE BRAKE PEDAL

CHASSIS

ADJUSTING THE BRAKE PEDAL
1. Check:
• brake pedal free play a
NOTE:
_
The end of the brake rod 1 should lightly con-
tact the brake master cylinder 2.
2. Adjust:
• brake pedal free play
M MMM
a. Loosen the locknut 1.
b. Turn brake rod 2 in or out until the correct
Turning in
Turning out
c. Tighten the locknut to specification.
NOTE:
_
Make sure that there is no brake drag on the
front or rear wheels.
L LLL
3 - 26
Out of specification → Adjust.
Brake pedal free play
0 mm (0.0 in)
M MMM M M MMM M M MMM M
free play is obtained.
Free play is increased.
Free play is decreased.
Locknut
17 Nm (1.7 m · kg, 12 ft · lb)
L LLL L L LLL L L LLL L
CHK
ADJ
M MMM M M MMM M MMM
L LLL L L LLL L LLL