Typical Applications; Indicators - Eaton Powerware 5110 User Manual
Hide thumbs
Also See for Powerware 5110:
- User manual (14 pages) ,
- Reference manual (120 pages) ,
- User manual (2 pages)
Table of Contents
Advertisement
Typical applications
Indicators
1. On/Off/Test Switch
One switch controls power to your equipment and performs a self-test to detect
overload/undercharge.
Turn on the UPS.
Press and hold the switch for more than one second and release the switch after the
beep. The UPS will start.
Turn off the UPS.
Press and hold the switch for more than one second and release the switch. The UPS
will shut down completely.
Perform Self-test.
The UPS will perform self-test for about 4.5 seconds when the UPS is turned on and
the utility power is present.
1023922
User's manual
Revision A
350 - 1500 VA
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Powerware 5110 and is the answer not in the manual?
Questions and answers