Typical Applications; Indicators - Eaton Powerware 3105 User Manual

Typical applications

Indicators

1. On/Off Push Button/Test Switch
One switch controls the power to your equipment. Upon power turn on, unit performs
a self-test to detect overload or undercharged conditions.
Turn on the UPS
Press and hold the push button switch depressed for more than one second. Release
the switch after the audible beep is sounded.
Turn off the UPS
Press and hold the push button switch for more than one second and release the
switch after the audible beep is sounded.The UPS will shut down.
Self-Test
The UPS performs a self-test for about 3 seconds when the UPS is turned on.
1023921
User's manual
Revision A 350 - 700 VA
7