Table of Contents
Advertisement
1-3. Opening, closing and locking the doors
NOTICE
To prevent damage to the power back door
■
Make sure that there is no ice between the back door and frame that would pre-
●
vent movement of the back door. Operating the power back door when exces-
sive load is present on the back door may cause a malfunction.
Do not apply excessive force to the back door while the power back door is oper-
●
ating.
Take care not to damage the sensors (installed on the right and left edges of the
●
power back door) with a knife or other sharp object. If the sensor is disconnected,
the power back door will not operate in automatic operation.
When manually closing the back door immediately after the power back door
●
has been automatically opened fully, some resistance may be felt.
94
Advertisement
Table of Contents
