Table of Contents
Advertisement
2-4. Using other driving systems
When the set speed is shown in "km/h"
Fine adjustment: By approximately 0.6 mph (1 km/h) each time the lever is
operated
Large adjustment: By approximately 3.1 mph (5 km/h) for each 0.75 sec-
onds the lever is held
In the constant speed control mode (P. 302), the set speed will be
increased or decreased as follows:
Fine adjustment: By approximately 1 mph (1.6 km/h) each time the lever is
operated
Large adjustment: The set speed can be increased or decreased continu-
ally until the lever is released.
■
Changing the vehicle-to-vehicle distance
Preceding vehicle mark
298
Pressing the button changes the
vehicle-to-vehicle distance as
follows:
Long
Medium
Short
RX350
The vehicle-to-vehicle distance
is set automatically to long
mode when the "ENGINE
START STOP" switch is turned
to IGNITION ON mode.
RX450h
The vehicle-to-vehicle distance
is set automatically to long
mode when the "POWER"
switch is turned to ON mode.
If a vehicle is running ahead of
you, the preceding vehicle mark
will also be displayed.
Advertisement
Table of Contents
